Brakes

Approved advisories in this category.

Showing 121 to 144 of 211 advisories in Brakes.

• Excessive fluctuation in brake effort through each wheel revolution

  Reference 1.2.1 (e)

• Abnormal lag in brake operation on a wheel

  Reference 1.2.1 (d)

• Brakes imbalance across an axle such that the braking effort from any wheel is less than 50% of the maximum effort recorded from the other wheel on a steered axle

  Reference 1.2.1 (b)(ii)

• Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. Or in the case of testing on the road, the vehicle deviates excessively from a straight line

  Reference 1.2.1 (b)(i)

• Brake retaining or locking device ineffective or missing

  Reference 1.1.21 (f)

• The strength or continuity of the load bearing structure within 30cm of any braking system actuation component mounting (a prescribed area) is so weakened that the functionality of the braking system is affected

  Reference 1.1.21 (e)(ii)

• The strength or continuity of the load bearing structure within 30cm of any braking system actuation component mounting (a prescribed area) is significantly reduced (see Appendix A)

  Reference 1.1.21 (e)(i)

• Braking system component modification adversely affecting braking performance

  Reference 1.1.21 (d)(ii)

• Braking system component modification unsafe

  Reference 1.1.21 (d)(i)

• Any component insecure or inadequately mounted

  Reference 1.1.21 (c)

• Air or antifreeze to the extent that braking performance is affected

  Reference 1.1.21 (b)(ii)

• Air or antifreeze leaking

  Reference 1.1.21 (b)(i)

• Other braking system (e.g. antifreeze pump, air dryer etc.) component damaged or corroded leaking and system functionality adversely affected

  Reference 1.1.21 (a)(ii)

• Other braking system (e.g. antifreeze pump, air dryer etc.) component damaged or corroded to the extent that the braking system is adversely affected

  Reference 1.1.21 (a)(i)

• Endurance braking system obviously defective

  Reference 1.1.19 (b)

• Endurance braking system connectors or mountings insecure and functionality affected

  Reference 1.1.19 (a)(ii)

• Endurance braking system connectors or mountings insecure

  Reference 1.1.19 (a)(i)

• Load sensing valve missing where fitted as standard

  Reference 1.1.17 (d)

• Load sensing valve seized or inoperative and ABS not fitted or inoperative

  Reference 1.1.17 (c)(ii)

• Load sensing valve seized or inoperative and ABS functioning

  Reference 1.1.17 (c)(i)

• Load sensing valve linkage obviously incorrectly adjusted

  Reference 1.1.17 (b)

• Load sensing valve linkage defective

  Reference 1.1.17 (a)

• Actuator has no reserve travel and braking performance affected

  Reference 1.1.16 (e)(ii)

• Actuator has excessive travel of operating system indicating need for adjustment

  Reference 1.1.16 (e)(i)